GT350 with tilting table
SERIE “SMALL”
The first model in the machining center series with tilting table.
TWO-POSITION TURRET
The operating unit, made of cast iron, is composed of a two-position turret equipped with an integrated U-Axis facing head (diameter of 300 mm with a stroke of 70 mm) capable of turning a fixed workpiece and a max turning diameter of 350 mm. The second position, on the other hand, is equipped with a conventional spindle that can rotate at up to 4,500 RPM. The working axis of both positions is the same and to change from one to the other, the turret performs a 180° rotation.
SPINDLE
The conventional spindle is equipped with a transmission for the management of a tool changeable facing head. This turning device has a diameter of 135 mm and a stroke of 30 mm; ideal for machining small diameters at high rpm. The spindle is also specially designed to allow the application of angle heads.
BASEMENT
Constructed in rigid steel, stress-relieved weldment engineered to maximize rigidity while allowing open areas for efficient chip and coolant flow away from the working area.
TILTING TABLE
The tilting rotary table with 360,000 divisions and a ±120° non-continuous tilting range is driven by brushless axis motors and equipped with a hydraulic brake. The table top incorporates positioning, centering and clamping systems for 600 × 600 mm or 800 × 600 mm pallets.
TOOLS MAGAZINE
The tool changer magazine is offered in the standard version with 46 tool positions that can be expanded to 99 and 120 positions. It can be equipped with an external tool loader that allows to safely load the tool or simply check or replace the inserts without machine stops. The magazine can also be equipped with memory chips to transfer tool information from the presetting machine to the machining center.
SOFTWARE
Our team of computer technicians manages and programs the software of the machines, customizing it according to the machining needs of each customer.
